Ampere Pro v2.24 Final Apk Mod Lite [Latest]
Did you ever felt, that one charger/usb cable set prices your tool definitely speedy and the opposite no longer? Now, you could show this with ampere.
Degree the charging and discharging current of your battery.
– indicators on device
– indicators on android put on
The app works on android 4.Zero.Three+ devices. Now not every device is supported because there are gadgets which lacks the suitable size chip (or the interface) and that they can’t be supported at all. Please examine the list of no longer supported phones on the cease of the description.
The app is not intended to be ma correct. It’s far best precise for evaluate which charger/usb cable mixture is running the exceptional for you on the equal device.
Please study additionally the faq: http://goo.Gl/r8xgxx
Begin the app and wait ca. 10 seconds (“measuring” is on the show). After this time, the charging or discharging cutting-edge could be proven.
The modern relies upon on many stuff:
– charger (usb/ac/wireless)
– usb cable
– phone kind
– cutting-edge duties jogging
– display brightness
– wifi state
– gps kingdom
Please don’t use the readings on this app as concrete technological know-how. However, the readings are properly sufficient to notably degree how various chargers and usb cables fair at the identical device.
If the app suggests 0ma all the time, please use the settings choice “old size technique”. You could force the app with it to use the antique dimension interface, if the lollipop tool has as a minimum one.
Lamentably a few samsung devices do not give correct (measured) values (e.G.: s5), simply the maximum possible charging current with the actual usb cable/charger configuration. That is a firmware problem.
Historical past information: the app measures the charging/discharging cutting-edge of the battery. If your cellphone is not connected to a charger, you notice the discharging modern that is poor. If you connect a charger then the modern-day what the charger offers will be used to deliver your smartphone and the ultimate strength could be charged into the battery.
In case your smartphone consumes three hundred ma with out a charger connected (-300ma at the show), then a 500 ma charger will rate your battery maximum with two hundred ma current (200ma on display).
Technical data: the displayed current is a mean price from 50 measurements minus the ten higher values and the 10 lower values. The displayed contemporary can be shaky or risky or even 0 which means, that the android gadget provides unstable values. Each employer uses special battery types and other hardware making it tough to get correct outcomes approximately your charger.
Lipo batteries do not draw the maximum for the entire time it takes to price the smartphone. If your battery is charged almost full then the charging modern-day may be a great deal much less as through decrease battery tiers.
– a graph explaining lipo fee degrees: http://batteryuniversity.Com/_img/content material/ion1.Jpg
– dave’s (eevblog) lipo charging academic: http://youtu.Be/a6mkd5_-abk
Telephones/roms well suited handiest with “old measurement technique” switched on and selected the right “size interface”:
➤ htc one m7 / m8
➤ lg g3
Telephones/roms stated to be not working with this app:
➤ galaxy grand prime – fortuna3gdtv
➤ galaxy note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ galaxy s3 – d2att, d2spr, d2vmu
➤ galaxy tab4 7.Zero – degas3g
➤ htc desire 510 – htc_a11ul8x26
➤ htc one s (ville), x (endeavoru), xl (evita)
➤ htc sensation 4g – pyramid
Please do not give wrong rating, if your cellphone is one of the above. Now not the app is wrong, but your telephone does not guide this type of size yet.
If the app doesn’t paintings in your tool with pre-lollipop android version, then please study the primary and the second one posts on this xda developer forum thread: http://goo.Gl/pzqjg8 . Please publish your trouble with screenshots within the xda thread.
Please read also the faq: http://goo.Gl/r8xgxx
* Bug fixes and minor enhancements
Ampere FAQ: http://goo.gl/R8XgXX
For more info please read the change history: Settings => About Ampere => Change history
Note: When ampere would stuck in “measuring” state (after a firmware upgrade to Android 7.x) please clear Amperes’s app cache.
1.) Open the “Android Settings app” => “Apps” => “Ampere”
2.) Clear all data under the “Storage” menu
3.) Restart Ampere
★★★ MOD Lite ★★★
Optimized graphics and cleaned resources for fast load < improved result (3.95 MB total apk size);
All ads and services calls from activity removed;
Encrypted all resources;
Languages: En, Ru.
PRO features Unlocked | Analytics disabled
This app has no advertisements.
requirements: 4.0.3 and up